Daikin FT25JV1B Manual de instalación descargar pdf (Pagina 9)

5. Operation method

Turn the power on to the product after connecting the Transmission Monitor according to “4.Connection

method to product". After five seconds, the product starts communication between indoor and outdoor units.

The Transmission Monitor automatically judges the communication method to display the received data on

LCD.

The user selects the sender of signal to be monitored with the use of IN/OUT changeover switch, (select

indoor unit to monitor the indoor temperature, or outdoor unit to monitor compressor operating frequency of

outdoor unit) and then select pages that display the required data using of Display changeover switch. Page

No. is displayed by xP on the upper right of LCD. The number of pages depends on the transmission

method applied (e.g.1 or 7). The LCD display examples are shown below.

Out-DrComp=OFF 1P

INV:MultiHTpump

OutDr=HEAT

ALARM =H8

INDOOR 0 COOL 1P

Capacity=1.8kW

TYPE=Wall Mount

ERROR CODE =C3

INDOOR 1 STOP 1P

Capacity=3.2kW

TYPE=Floor Mount

No Error

Line 1 indicates the sender and its operating status. Whenever pushing the IN/OUT changeover switch, the

display changes from "Out-Dr" to "INDOOR 0" to "INDOOR 1" ̖,then "Out-Dr". Indoor unit in pair

system is displayed at "INDOOR 1". "INDOOR 0" displays only for the master unit (remote controller

connected units) of multiple systems including twin, triple, double twin, etc.

Out-DrComp=OFF 1P

INV:MultiHTpump

OutDr=HEAT

ALARM =H8

Out-DrComp=OFF 2P

Frequency= 48Hz

HPS =Normal

Out-DrComp=OFF 3P

OutDrTH= 35.5 㩩 C

HeatEX = 7.0 㩩 C

DischTH1= 75.0 㩩 C

The line 1 displays the sender and its status and switching page can not change the data displayed. The line

2 and 3 change displaying data whenever pressing the Display changeover switch.

There may be blank line partially when any data has not been received to be displayed in the line.

In some case, data ca not be received due to different type sending data depending on model or transmission

version.

Sender

Indoor unit in pair system is

displayed on INDOOR 1.

Page No.

The LCD does not display

data not received.

Dis

for outdoor unit

Display for indoor unit 0

(master unit)

Display for indoor unit 1

(slave unit)

Display for Page 1

Display for Page 2 Display for Page 3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 30 31

Comentarios a estos manuales

Sin comentarios

Daikin FT25JV1B Manual de instalación Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Acondicionadores de aire del sistema de división Daikin FT25JV1B