Daikin FXHQ-A Especificaciones descargar pdf (Pagina 28)

EDUS39-600-F5 Installation

FXHQ-M 27

•

Attach the plastic bushing (10) for remote controller wiring.

•

Insert the conduit for power supply wire in the conduit hole,

and fix it with the lock nut.

• Power supply wire

Holding the control box lid, loosen the 2 securing screws,

remove the control box lid, match up the phases on the

power supply terminal block inside (2P), and make the con-

nections.

After this is done, use the attached clamp (4) to bind wire

between units to the anchor point. (Refer to Fig. 28)

• Remote controller wire and transmission wire

Holding the control box lid, loosen the 2 securing screws,

remove the control box lid.

Thread the remote controller wire and transmission wire

through the conduit (11), secure with the clamp (4), and cut

off conduit (11) to suitable length. The conduit (11) can let

the wire pass to a maximum of 2 wires. If there are three

or more wires, use another conduit (11). Pull the wires

inside through plastic bushing and connect the wires to the

transmission terminal block (6P inside the control box. After

connecting, use the clamp (4) to bind the remote controller

wire together with the transmission wire to the anchor.

(Refer to Fig. 27, 28, 29)

• The conduit (11) allows the remote controller wire and

transmission wire pass to a maximum of 2 wires.

WARNING

• Never connect power supply wiring to the terminal block for

remote controller wiring as this could damage the entire sys-

tem.

• Use only specified wire and connect wires to the terminal

tightly. Be careful wires do not place external stress on ter-

minals. Keep wires in neat order so as to not obstruct other

equipment. Make sure that the electric box lid fits tightly.

Incomplete connections could result in overheating and, in

worse cases, result in electric shock or fire.

Resin bush (10)

Lock nut

Conduit

Conduit hole

Fig. 26

POWER SUPPLY

power supply

How to connect power supply

terminal block (2P)

Control box

Transmission

terminal block (6P)

Power supply

teminal block (2P)

Remote controller wire

and transmission wire

Refer to Fig. 28

Ground terminal

Power supply wire

Gas pipe

Liquid pipe

Drain pipe

Conduit

Corking or Putty

Resin bush (10)

Control box

lid secuing screw (2 pcs.)

Control box lid

Insulating tube (11)

Clamp (4)

Fig. 27

Fastener

Clamp (4)

Ground wire

After securing the

cramp material

to the bracket,

cut off any extra

material.

Remote controller wire and

transmission wire

Fastener

Power supply wire

Fig. 28

P1 P 2 F1 F2 T1 T2

REMOTE

CNTRL

FORCED

OFF

TRANSMISSION

WIRING

Clamp (4)

Remote controller wire

Transmission

terminal block (6P)

Transmission wire

Insulating

tube (11)

1 in.

Fig. 29

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Comentarios a estos manuales

Sin comentarios

Daikin FXHQ-A Especificaciones Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Acondicionadores de aire del sistema de división Daikin FXHQ-A