Daikin FTXR42EV1B9 Manual de instalación Pagina 12
- Pagina / 17
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
■English 10
6.
Wiring.
1) Strip wire ends (15mm).
2) Match wire colours with terminal numbers on indoor and outdoor unit’s terminal blocks and firmly screw wires to the
corresponding terminals.
3) Connect the earth wires to the corresponding terminals.
4) Pull wires to make sure that they are securely latched up, then retain wires with wire retainer.
5) In case of connecting to an adapter system. Run the remote control cable and attach the S21.
(Refer to 7. Connecting to the HA system.)
6) Shape the wires so that the service lid fits securely, then close service lid.
WARNING
1) Do not use tapped wires, stranded wires, extension cords, or starburst connections, as they may cause overheating, electrical
shock, or fire.
2) Do not use locally purchased electrical parts inside the product. (Do not branch the power for the drain pump, etc., from the
terminal block.) Doing so may cause electric shock or fire.
3) Do not connect the power wire to the indoor unit. Doing so may cause electric shock or fire.
7.
Connecting to the HA system.
1) Remove the front grille. (3 screws)
2) Remove the decelerator assembly parts.
(1 screw)
2-1) Remove the decelerator assembly
part screws. (See Fig. 1)
2-2) Remove the decelerator assembly
part connector. Remove by pressing
on the tabs on the bottom of the
connector.
(See the tab position diagram 1)
3) Remove the electric parts box.
(1 screw, 2 tabs)
3-1) Remove the electric parts box fixing
screw.
3-2) Pull the electric parts box toward
you and discharge the tab2.
Shape wires so
that the service
lid will fit securely.
Terminal block
Electrical component box
Wire retainer
Firmly secure wire retainer
so that wires sustain no
external stress.
Use the
specified
wire type.
1
2
3
123 LN
Use 1.6mm or 2.0mm diameter wires.
When wire length exceeds
10m, use 2.0mm diameter wires.
60245 IEC 57
H05RN
Firmly fix the wires with
the terminal screws.
Outdoor unit
Indoor
unit
Firmly fix the wires with
the terminal screws.
Fig. 1
Decelerator assembly
part fixing screw
Anti-drip cover
Electric parts box
fixing screw
Anti-drip cover
fixing screw
Position of tabs on the decelerator
assembly part connector
Location of the tabs
on the electric parts box
Ta b
Tab 2
Tab 1
Buzzer
01_EN_3P190651-1J.fm Page 10 Monday, November 29, 2010 4:32 PM
- INSTALLATION 1
- Low Voltage 2006/95/EC 2
- Safety Precautions 3
- Accessories 4
- Choosing an Installation Site 4
- 3 ■English 5
- Installation Tips 6
- ■English 6 8
- Piping bundle diagram 10
- Indoor Unit Installation 11
- Connecting to the HA system 12
- Matrix display 14
- Refrigerant Piping Work 15
- Trial Operation and Testing 16
- (1012) HT 17
Relacionado con productos y manuales para Acondicionadores de aire del sistema de división Daikin FTXR42EV1B9
Acondicionadores de aire del sistema de división Daikin BSVQ36PVJU Manual de instalación
(17 paginas)
(17 paginas)
Acondicionadores de aire del sistema de división Daikin VKM50GMV1 Manual de instalación
(20 paginas)
(20 paginas)
Acondicionadores de aire del sistema de división Daikin FXMQ96MVJU Manual de instalación
(12 paginas)
(12 paginas)
Acondicionadores de aire del sistema de división Daikin FLK25BVMB Manual de instalación
(15 paginas)
(15 paginas)
Acondicionadores de aire del sistema de división Daikin FCQ140DAV3B Manual de instalación
(28 paginas)
(28 paginas)
TomTom GPS-Empfänger Benutzerhandbücher
Beginnend mit L
Comentarios a estos manuales