Daikin BRC1E51A7 Manual de instalación descargar pdf (Pagina 11)

English 9

(1-3) Adjust the unit to the right position for installation.

(Refer to “4. PREPARATIONS BEFORE INSTALLATION-

(1)”.)

• At this time, using the positioning jig for installation (15)

allows to confirm the position from under surface of the

unit to under surface of the ceiling.

(1-4) Check the unit is horizontally level.

CAUTION

• The indoor unit is equipped with a built-in drain pump and float

switch. Verify that it is level by using a level or a water-filled

vinyl tube.

(If the unit is tilted against condensate flow, the float switch may

malfunction and cause water to drip.)

(1-5) Remove the washer fixing plate (7) used for preventing the

washer from falling and tighten the upper nut.

(1-6) Remove the paper pattern for installation (5).

(2) For existing ceilings

(2-1) Install the indoor unit temporarily.

• Attach the hanger bracket to the suspension bolt. Be sure to fix it securely by using nut and washer from

upper/lower sides of hanger bracket. If you use the washer fixing plate (7), it will prevent the falling of

the washer.

(2-2) Adjust the height and position of the unit.

(Refer to “4.PREPARATIONS BEFORE INSTALLATION-(1)”.)

(2-3) Perform steps (1-4), (1-5) in (1) For new ceilings.

Fit the shorter side

of the convex.

Underside of

the ceiling

Positioning jig for

installation (15)

(attached)

Underside

of the unit

main body

Fig. 11

Level

Vinyl tube

[Maintaining horizontality]

Fig. 12

Field supply

Washer (3) (attached)

[Securing the hanger bracket]

Hanger bracket

Tighten (double nuts)

Fig. 13

Insert

Washer fixing plate (7)

[Securing the washer]

(attached)

Fig.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Comentarios a estos manuales

Sin comentarios

Daikin BRC1E51A7 Manual de instalación Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos Daikin BRC1E51A7