Daikin BRC230Z4 Manual de usuario

WIRED REMOTE CONTROLLEROPERATION MANUALMODELS : BRC230Z4BRC230Z8BRC24Z4BRC24Z801_EN_3P209820-1.indd 101_EN_3P209820-1.indd 1 2007/11/06 12:04:58

8OPERATIONTIMER OperationTimer functions are useful for automatically switching the airconditioner on or off at night or in the morning.You can also u

9OPERATION To cancel ON TIMER and OFF TIMER operation1Press “ button” to select ON TIMER or OFF TIMER.● The timer setting is displayed.2Press “ butt

10OPERATIONSIMPLE 7 DAY TIMER Operation To use SIMPLE 7 DAY TIMER operation● Make sure the day of the week and time are set. If not, set the day of t

11OPERATION5Press “ , button” and select time.● Set the OFF TIMER.● The time is selectable in 10 minute increments between 00:00 and 23:50.“” blinks

12OPERATION11Press “ button”.● To complete the timer setting, press “ button”.The normal display appears again and “PROG” is displayed. Press “ butt

13OPERATION Setting SIMPLE & MULTI 7 DAY TIMER using copy mode● A setting can be copied to the setting for the next day.1Press “ button”.● Press

14OPERATIONMULTI 7 DAY TIMER OperationYou can set SIMPLE 7 DAY TIMER, zone control, and thermistor switching. To use MULTI 7 DAY TIMER operation1Pres

15OPERATION6Press “ button”.● Switch the thermistor sensor.● Switching of thermistor sensor is available only if an optional product is installed, wi

16OPERATIONFor 7 DAY TIMER operation, two types are provided: simple and multi. Use the desired type according to your lifestyle and situation. You ca

17OPERATIONFor ZONE control, select the rooms you wish to heat or cool. To select ZONE1Press “ button”.● Select the desired ZONE number you wish to s

01_EN_3P209820-1.indd 201_EN_3P209820-1.indd 2 2007/11/06 12:05:142007/11/06 12:05:14

18OPERATIONYou can add up to 2 optional temperature sensors. (For example in the living room, bedroom, and so on.)By switching the detection position

19OPERATIONYou can register a name for each zone and temperature sensor.When you switch the zone or temperature sensor, the registered name will be di

20OPERATIONName registration To initialize registered names1Press “ button” for at least 4 seconds.● The display shifts to name setting.2Press “ butt

21CARE Filter Cleaning Notice ResetWhen the fi lter becomes dirty with dust, or the system has operated for a predetermined period of time the remote

22MEMO01_EN_3P209820-1.indd Sec1:2401_EN_3P209820-1.indd Sec1:24 2007/11/06 12:05:362007/11/06 12:05:36

2301_EN_3P209820-1.indd Sec1:2501_EN_3P209820-1.indd Sec1:25 2007/11/06 12:05:362007/11/06 12:05:36

24MEMO01_EN_3P209820-1.indd Sec1:2601_EN_3P209820-1.indd Sec1:26 2007/11/06 12:05:362007/11/06 12:05:36

01_EN_3P209820-1.indd Sec1:2701_EN_3P209820-1.indd Sec1:27 2007/11/06 12:05:362007/11/06 12:05:36

3P209820-1 M07B043(0709)HTTwo-dimensional bar code is a code for manufacturing.01_EN_3P209820-1.indd Sec1:2801_EN_3P209820-1.indd Sec1:28 2007/11/

1READ BEFORE OPERATIONName and Functions of Buttons ······························ 2Preparation before Operation ·································· 4O

2READ BEFORE OPERATIONName and Functions of Buttons1 567892341011 13121514● Two remote controllers can connect to the system. In that case, the remote

3READ BEFORE OPERATION1.ON/OFF buttonPress this button to turn the air conditioner ON and OFF.2.MODE selector buttonPress this button to select the AU

4READ BEFORE OPERATIONPreparation before Operation Turn the breaker ONTurn the breaker ON if nothing is displayed on the LCD of the remote controller

5READ BEFORE OPERATION7Press “ button” to enter the settings.● The set time and day will be displayed. To cancel Time and Day Settings1Press “ butt

6OPERATIONFAN · DRY · AUTO · COOL · HEAT OperationThe air conditioner operates with the operation mode of your choice.From the next time on, the air c

7OPERATION To change the airfl ow setting5Press “ button” and select an airfl ow rate.● The volume of air is selectable from two levels while the air